Mar 232019
 

Download Mentor Graphics FloEFD 2019.1.0 v4540 Standalone full license

Mentor Graphics FloEFD 2019.1.0 v4540 Standalone/NX/CATIAV5/Creo/SolidEdge Suite x64

Mentor Graphics FloEFD 2019.1.0 v4540 standardAlone
Mentor Graphics FloEFD 2019.1.0 v4540 standardAlone
Mentor Graphics FloEFD 2019.1.0 v4540 for catia full
Mentor Graphics FloEFD 2019.1.0 v4540 for catia full
Mentor Graphics FloEFD 2019.1.0 v4540 for PTC Creo full
Mentor Graphics FloEFD 2019.1.0 v4540 for PTC Creo full
Mentor Graphics FloEFD 2019.1.0 v4540 for NX full
Mentor Graphics FloEFD 2019.1.0 v4540 for NX full
Mentor Graphics FloEFD 2019.1.0 v4540 for solidedge 2019 full
Mentor Graphics FloEFD 2019.1.0 v4540 for solidedge 2019 full

System requirements:
Microsoft Windows 7 Professional, Ultimate or Enterprise 64-bit edition, Windows 8, Pro or Enterprise 64-bit, Windows 10 Pro or Enterprise 64-bit
For solver: Microsoft Windows 2012 Server x64, Windows 2012 Server R2 x64, Linux RHEL 6.6, RHEL 7.3, Windows Server 2008 R2 with HPC Pack 2008 R2, Linux SUSE SLES 11 SP3, SUSE SLES 12 SP0
Microsoft Office 2013, Microsoft Office 2010, Microsoft Office 2007
Ethernet network adapter
Mouse or other pointing device
4 GB RAM minimum, more recommended
1 GB of free hard disk space, more required for simulation models
For CAD dependent installers, the pre-installed 64-bit versions are:
for CATIA V5
CATIA V5 R19 (recommended SP9)
CATIA V5 R20 (recommended SP7)
CATIA V5 R21 (recommended SP6)
CATIA V5-6 2012 (R22) (recommended SP6)
CATIA V5-6 2013 (R23) (recommended SP6)
CATIA V5-6 2014 (R24) (recommended SP7)
CATIA V5-6 2015 (R25) (recommended SP6)
CATIA V5-6 2016 (R26) (recommended SP6)
CATIA V5-6 2017 (R27) (recommended SP4)
CATIA V5-6 2018 (R28) (recommended SP0)
for CREO Parametric
Creo Parametric v2.0 (recommended datecode M250)
Сreo Parametric v3.0 (recommended datecode M160)
Creo Parametric v4.0 (recommended datcode M070)
Creo Parametric v5.0 (recommended datcode v5.0.2.0)
for Siemens NX
Siemens NX 12.0.0, 12.0.1, 12.0.2
Siemens NX 11.0.0, 11.0.1, 11.0.2
Siemens NX 10.0.0, 10.0.2, 10.0.3
Siemens NX 9.0.1, 9.0.2, 9.0.3
Siemens NX 8.5.1, 8.5.2, 8.5.3
Siemens NX 1847 Series (1847, 1851, 1855,..) не поддерживаются!
for Siemens Solid Edge
Solid Edge ST10
Solid Edge 2019
Description: FloEFD Standalone version does not require pre-installed CAD-systems, based on advanced technology
Computational Fluid Dynamics (CFD) and allows you to analyze a wide range of complex problems, including:
• Analysis of hydro-aerodynamics and heat exchange of two- and three-dimensional models
• Analysis of external and internal flow streams
• Analysis of steady and unsteady flow
• Flow of incompressible fluid and compressible gas, including including combustible mixture, at subsonic,
transonic, supersonic and hypersonic ejection modes
• water vapor condensation
• Calculation of relative air humidity in gas flows
• Flow and non-Newtonian fluids (only laminar flow regime)
• Flow in compressible fluid (fluid density depends on pressure)
• Flows in real gases
• Laminar, turbulent and unsteady flow analysis
• Analysis of eddy flows and fans
• Flow analysis with solid inclusions
• Analysis of heat transfer within and between liquids and solids
• Analysis of the transfer inside solids in the absence of washing flow
• Calculation of thermal contact resistance
• Calculation of electrical contact resistance
• Thermoelectric coolers
• Heat transfer by radiation
• Joule heating
• Flows with gravity effects (also known as buoyancy effect)
• Porous media
• Heat pipes
• Heat transfer in printed circuit boards
• Heat transfer in perforated plates
• Current of aerosol flows
• Considering the roughness of bodies during flow
• Accounting for the tangential movement of the walls (mixing and rotation)
• Flow in rotating devices
• Cavitation in fluid flow
• Combustion in gas mixtures
FloEFD for NX-CATIAV5-Creo-Solid Edge applications for modeling flow and heat transfer in liquids and gases in the environment
related CAD systems.
FloEFD is fully integrated into the environment of the corresponding CAD systems and uses solvers based on computational fluid dynamics (CFD) technology
If you want to download Mentor Graphics FloEFD 2019.1.0 v4540 full license, please click to DOWNLOAD symbol and complete check out a little help my website is maintained. The download link is appeared automatically when you complete check out.

Please see youtube video for download instruction by open *.txt file and copy youtube video link paste to your browser If you don’t know how to download.
Inside folder Mentor Graphics FloEFD 2019.1.0 v4540, already have crack’s file and instruction how to install Mentor Graphics FloEFD 2019.1.0 v4540 step by step. I guarantee you can install Mentor Graphics FloEFD 2019.1.0 v4540 successfully if you follow that instruction.
If you also can not install it or any problems, please contact to me by email: clickdown.org@gmail.com, then I will help you to install software by teamviewer.
Thanks a lot

 Leave a Reply

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>

(required)

(required)