Download BASCOM-AVR 2.0.8.3 full license 100% working forever
Link download BASCOM-AVR 2.0.8.3 win32 win64 full cracked
BASCOM-AVR 2.0.8.3 full license
Working with BASCOM-AVR 2.0.8.3 ful crack
Description: Bascom-AVR is an integrated program development environment for microcontrollers of the Atmel AVR family in BASIC high-level language.
Bascom includes the following development components:
Basic compiler for AVR
Code editor
Debugger simulator
Terminal emulator
Contextual information and reference system
Utilities for loading hardware emulators and programmers.
There are operators for working with devices located on the microcontroller chip and external devices most commonly used in microprocessor systems. The compiler allows you to create programs for AVR microcontrollers – Tiny, Mega, Xtiny and Xmega.
Added in this version
2083.003 special build
– corrected xmega dat file options for COM ports (C3/D3)
– added shortcut CTRL+ALT+P for proper indent
– fixed Xmega-E series config XPIN for slewrate which works on the entire port and uses PORTCFG_SRLCTRL register
– config printbin has only one option but NORMAL was added since that is the default: CONFIG PRINTBIN=EXTENDED|NORMAL
– x.m = y.m or z.m resulted in a storebit error when bytes were used
– crc16uni can handle words now
– local did not support new dim syntax : Local Start_idx , Temp_idx , Temp_step As Byte
– config rc5 background mode has an additional option to manual specify the prescaler value. by default it is calculated.
2083.001
– new option SAFE for variables. Dim b as bit SAFE , see help.
– added BOOTONLY option to $LOADER directive. $loader bootaddress[,BOOTONLY] this will write just the boot loader code to the BIN file. The HEX remains as is.
– you can select the Options_Select_Settings_File now. This setting is stored in the registry.
– project files are stored with absolute files names inside the prj file. An absolute file name is relative to the location.
– simulator bug fixed where SI file simulation data was not processed properly.
– MemFill added.
– using instr() with {xxx} for the search string does not work : pos=instr(someAString,”{065}”)
– using compare_a/compare_b=clear for timer0 results in SET instead of CLEAR. you can use COMPARE_A_PWM=CLEAR_UP instead.
– bascomp command line utility updated to support new file structure
– multiple instances bug fixed.
– mcs.lbx was not in sync with mcs.lib.
– when using channel specifier without # you will get an error
– stk500v2 based programmers like mkII and stk500v2 could give a program error when your code contains empty blocks And the processor has multiple 64KB segments. applies to normal mega only.
– crc8 overloaded version added for big strings.
– 2082 broke the default printing function
– added DES asm instruction.
– added DesEncrypt and DesDecrypt which are also supported by the simulator
– inputbin accepts an optional variable for the number of bytes to receive. delimited by a ;
– simulator update.
– simulator double click cycles, will reset cycles
– simulator allows to load a custom serial data file from file
– Xtiny support, requires a commercial add on
– CTS/RTS bug fixed : only part of the buffer was used
– added PA version of dat files M88PAdef,M644PAdef,M48PAdef,M168PA. These are almost the same as the P versions. They are binary compatible and have the same ID
– searching in files would not search in the specified folder when the folder name contained a space. Instead the root folder was used.
– $programmer option did not support conditional compilation. It was global. Now supports #IF/#ENDIF. but only when ‘Use new method’ is used in environment IDE options.
– CLEAR serialinx buffer did not clear the RTS pin when cts/rts was used for xmega uarts 4-7.
– xmega high baud calculation > 2MB and higher did not support double rate flag resulting in a wrong baud rate
– for next using a step for bytes could fail when the byte boundary was crossed.
– xmega num2str code rewritten and xmega routine rewritten that used _XmegaFix_Rol_R1014 and _XMEGAFIX_CLEAR. These routines are not used anymore!
– using a string function with select case, could result in improper branching, depending on the user function.
select case mid(someString,start,len) for example.
– bascom-AVR and the SETUP are now code signed.
If you want to download BASCOM-AVR 2.0.8.3 full license, please click to DOWNLOAD symbol and complete check out a little help my website is maintained. The download link is appeared automatically when you complete check out.
Please see youtube video for download instruction by open *.txt file and copy youtube video link paste to your browser If you don’t know how to download.
Inside folder BASCOM-AVR 2.0.8.3, already have crack’s file and instruction how to install BASCOM-AVR 2.0.8.3 step by step. I guarantee you can install BASCOM-AVR 2.0.8.3 successfully if you follow that instruction.
If you also can not install it or any problems, please contact to me by email: [email protected], then I will help you to install software by teamviewer.
Thanks a lot