Download Sakpe v0.9.8.0 (Beta) full license forever

Link download Sakpe v0.9.8.0 (Beta) full cracked

Working with Sakpe v0.9.8.0 (Beta) full license

The software contains the following modules and gadgets.
Equipment sizing tools
SepRate: sizes both vertical and horizontal two-phase oil-gas separators, three-phase water-oil-gas separators, free-water knockout drums (FWKO) and flare knockout drums (KOD). Also calculates the capacity of existing vessels (“Rating Mode”). Calculation is based on API SPEC 12J and API RP 521.
CompPower: calculates the required brake power of multistage reciprocating compressors based on the guidelines available on the GPSA Engineering Data Book.
PumpPower: calculates the required shaft power of centrifugal pumps.
VesselSize: sizes vertical/horizontal pressure vessels and estimates the minimum required wall thickness (based on ASME Code, Section VIII, Div. 1) and the weight of the vessel (full and empty).
ExpSize: calculates the volume change a liquid undergoes due to thermal expansion. The volume required by an expansion vessel may be calculated, which is in particular useful when designing heat transfer circuits based on hot-oil circulation.
Piping sizing tools
GasDrop: calculates the inlet pressure, the outlet pressure or the flow rate for compressible flow (gas lines) based on any of the following equations: Weymouth, AGA fully turbulent, Panhandle A, Panhandle B, Oliphant, Spitzglass, and ideal gas equation (isothermal). The module features a built-in list of fittings (such as valves, elbows, etc.) and piping materials’ roughness.
LiqDrop: calculates the inlet pressure, the outlet pressure, required diameter, or the flow rate for incompresible flow (liquid lines). The module features a built-in list of fittings (such as valves, elbows, etc.) and piping materials’ roughness.
TwoSize: sizes two-phase gas-liquid lines, i.e. internal diameter, based on API RP 14E (5th Ed).
PumpNPSH: calculates the available Net Positive Suction Head (NPSH) for centrifugal and reciprocating pump installations.
HeaderRate: estimates the capacity of a flare header using the ideal gas equation.
GasValve: calculates the flow coefficient (CV) of a gas control valve.
LiqValve: calculates the flow coefficient (CV) of a liquid control valve.
Pressure-relieving devices sizing tools
GasPSV: calculates the required orifice of a pressure safety valve (PSV) for gas relief based on API RP 520 Part I (7th Ed)
LiqPSV: calculates the required orifice of a pressure relief valve (PRV) for liquid relief based on API RP 520 Part I (7th Ed)
SteamPSV: calculates the required orifice of a pressure safety valve (PSV) for steam relief based on API RP 520 Part I (7th Ed)
Last but not least, some handy tools
Unit Converter: convert between the most usual units found in the O&G industry.
Interpolator: given two points, extrapolate a third one (linear).
Steam Table: given a pressure, calculate the saturation steam temperature, and vice-versa.
Typical Piping: browse through a typical steel piping class used for general hydrocarbon service (internal/external diameter, MAWP and Schedule). You can also obtain the internal diameter of a pipe by entering directly its nominal diameter/schedule.
If you want to download Sakpe v0.9.8.0 full license, please click to DOWNLOAD symbol and complete check out a little help my website is maintained. The download link is appeared automatically when you complete check out.

Please see youtube video for download instruction by open *.txt file and copy youtube video link paste to your browser If you don’t know how to download.
Inside folder Sakpe v0.9.8.0, already have crack’s file and instruction how to install Sakpe v0.9.8.0 step by step. I guarantee you can install Sakpe v0.9.8.0 successfully if you follow that instruction.
If you also can not install it or any problems, please contact to me by email: clickdown.org@gmail.com, then I will help you to install software by teamviewer.
Thanks a lot